SITE VISITS AND PLANTING SCHEMES
We are able to provide a planting advisory service whereby we will devise
designs and planting suggestions tailored to your plot and requirements.
During our initial communication with you we will discuss your needs,
our fees and timescale.
Site visits and assessments are available at the rates shown below.
A full written site report is available following our visit at extra
cost. Please call 01452 311525 to arrange a site visit. Please note
that normally a minimum of 2 weeks notice is required for site visits.
1st November to 28th February £27.95 per hour on site, and travelling
time, plus 80p per mile travelled.
1st March to 31st May £33.35 per hour on site, and travelling time,
plus 95p per mile travelled.
1st June to 30th August £27.95 per hour on site, and travelling time,
plus 80p per mile travelled.
1st September to 31st October £33.35 per hour on site, and travelling
time, plus 95p per mile travelled.
|
WILDLIFE RECORDING APPLICATIONS
Disclaimer: The author of these applications accepts no responsibility
for damages resulting from the use of this product or CyberTracker
software and makes no warranty or representation, either express
or implied, including but not limited to, any implied warranty
of merchantability or fitness for a particular purpose. This software
is provided "AS IS", and you, its user, assumes all risks when
using it.
What are these applications for?
Below you will find various free wildlife logging applications that
I have written for use with CyberTracker software (V3.205 or greater)
on handheld devices. CyberTracker generally works on most PDA's,
Palms and Smartphones with a touchscreen and Windows Mobile operating system. Before you start however please check the
compatibility of your device at : http://www.steventonconsulting.com/CyberTrackerFAQ.aspx
I personally use CyberTracker on a WM5 Mio P350 digiwalker in
a waterproof Aquapac and find this set up works extremely well
in the field.
My applications have been designed to maximise the efficiency
of field data collection and monitor wildlife populations in a
way not possible previously. CyberTracker uses GPS to record the
location from where your sightings are made so is intended for
use on mobiles with GPS receivers. It can however still be used
without GPS as an ordinary wildlife logging application. Eventually
I hope to add similar applications for other forms of wildlife.
I hope you enjoy using my CyberTracker applications!
Before you start I highly recommend reading the various help available
on the CyberTracker website in particular the "frequently asked
questions" section. You can find some useful links at the bottom
of this page.
To use my applications proceed as follows:
- Download the latest version of CyberTracker tracker software
onto your desktop P.C. available at:
http://www.steventonconsulting.com/cybertracker.aspx
Note: CyberTracker requires Microsoft Windows 2000/XP/2003/Vista.
Windows 95/98/Me are not supported.
- Click the appropriate download link at the foot of this page, choose "save" and save to a folder on your desktop PC as a .ctx file
- Open CyberTracker on your desktop P.C. and select "open database"
- Find, select and open the downloaded ctx file
- Under the file menu select "save as" and save my application
with a name of your choice.
- Connect your mobile device to your desktop via ActiveSync
or equivalent.
- Once connected return to CyberTracker, ensure that my application
is opened and click "install windows mobile" or "install palm"
At this stage you will be prompted to register CyberTracker
software for which a password will be required and emailed to
you.
- Once you have your password repeat steps 6 and 7 and follow
the on screen instructions. CyberTracker will install a CAB
file onto your mobile device. At this point perform any necessary
steps to install CyberTracker onto your mobile device.
- Once you have CyberTracker successfully installed onto your
device, repeat steps 6 and 7, this time to transfer my application
to your device.
- You are now ready to begin using CyberTracker! To get you
started you will find some help taps at the top of each screen
on my applications.
- Tip: if you wish to use CyberTracker at the same time as
other applications with built in GPS such as mapping applications,
then I suggest that you open these applications and acquire
a GPS signal before you first open CyberTracker. Once CyberTracker
has detected a free GPS port, it will remember it for all future
tries.
- To upload your sighting from your mobile device back to your
desktop simply reconnect using ActiveSync or equivalent. Once
you have a connection your sightings should be automatically
uploaded for further analysis, export etc.
Further
help and advice:
For further advice please refer to the built in help in CyberTracker.
You may also find the following links helpful:
http://www.steventonconsulting.com/CyberTrackerFAQ.aspx
http://www.steventonconsulting.com/FlashDemo/CyberTracker3.html
http://www.cybertracker.org/Help/Index_v3.htm
Unfortunately I am unable to answer emails relating to the use of either my applications or CyberTracker software, however please feel free to send any comments, or suggestions using the contact form here :
click to go to contact form
with the phrase "cybertacker wildlife logging" at the top of your comments.
You can also email me any sightings using the "export data"
function in CyberTracker. If I receive enough wildflower sightings
then eventually I plan to release them back as a free download
in the form of a wildflower "points of interest" database. This
could then be uploaded to GPS devices such as SAT Nav's or mapping
applications such as memory map.
download plantrecording.ctx
download birdrecording.ctx
|
|
